Geekvape Aegis Boost 40W Pod Kit

Geek Vape have set the standard for developing mods that are designed to be resistant to shock, water and dust damage. For example, the Aegis X, Legend and Solo. They now bring to you the Aegis Boost Mod Pod Kit. The Aegis Boost Mod Pod kit is the first pod system released onto the vaping market designed to be resistant to damage caused by dust, shock and water. It features a 2ml pod juice capacity, refillable pods, 40W VW output and 1500mAh internal battery capacity. The new Geekvape Boost Mesh Coils are designed to create a smooth and flavoursome sub-ohm vaping experience, just like your regular sub-ohm tanks.

Powerful and Lightweight
The Aegis Boost Pod System maybe durable but it is one of the lightest pod systems on the market, weighing only 120 grams and that is with a 40W max output. A single charge can last up to 36 hours, depending on usage and Geekvape themselves even say that they recommend users to use coil builds that cater to a higher wattage. The reality is to get the longest out a single charge, simple use a coil that operates at a lower wattage.

Mouth to Lung & Direct to Lung

The Boost kit has two separate coil options and an adjustable airflow. We recommend that if users are chasing a more mouth to lung hit, slightly close the airflow and use the 0.6ohm coil. However, if users are after a more sub-ohm style vape, we recommend that they open the airflow fully and utilise the 0.4ohm coil.

It's important to bare in mind though, both coil options available for the Geekvape Boost Kit are sub-ohm coils and therefore, users must not vape any nicotine strengths above 6mg.

RDTA

Geekvape have taken the Boost kit one step further by allowing vapers the option to use either replaceable pods or RDTAs. The RDTA section can be used to build specific coils so they can be utilised with the Boost kit.

Simplicity
The Boost pods use interchangeable coils and incorporate a top filling section to make them easier to use. They are designed to be leak proof with an adjustable leak proof valve.

Military Grade
The Aegis Boost uses the best and most durable materials to make them IP67 waterproof, dust proof and shockproof. The materials consist of food grade silicon rubber, zinc alloy and tear resistant leather. All these combined make the Boost ideal for extreme outdoor conditions.

AS Multi-Mode Chipset
The AS Multi-Mode chipset is the heart of the Boost kit and has a super fast ramp up time of less than 0.8 seconds. It supports a variety of output modes including variable voltage. variable wattage and temperature control. For temperature control, it has a smart overhead protection system.

Recommended E-Liquids
We recommend that vapers only use e-liquids that have a minimum VG to PG ratio of 60/40 with a maximum nicotine strength of 6mg. If you choose to use the RDTA section and build coils that have a resistance above 1ohm, users can then use 50/50 or nicotine salt e-liquids.

Charging

The Boost Kit supports a fast 1.5A charge which allows the battery to be charged in a quick space of time. To ensure your battery stands the test of time, we recommend that you only charge your battery once it is fully drained and take it off charge as soon as it is fully charged.

• Size: 106 x 39 x 27mm
• Colour: Almighty Blue, Aura Glow, Space Black, Devil Red, Gun Metal
• Battery Capacity: 1500mAh
• Material: Stainless Steel, Aluminium & SLI Silicon
• Power Output Range: 5-40W
• Voltage Output Range: 1-6V
• Chipset: AS Multi-Mode Chipset
• Ramp Up Time: Instant Firing 0.08S
• Display: 0.42inch OLED Display
• Charging: Micro USB Port - 1.5A (5V)
• Safety Features: Over Temperature Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection & Over Discharge Protection
• Filling Mechanism: Easy Access Top-Fill Mechanism
• Durability: Rated For Extreme Outdoor Use With IP67 Water, Dust and Shock Resistant Materials. These are also corrosion resistant.
• Coils: 0.6ohm Ka1 Mesh Coil & 0.4ohm Coil
• Resistance Range: 0.2ohm - 3ohm

• 1 x Geek Vape Boost Kit
• 1 x Pre-Installed Coil
• 1 x Spare Coil
• 1 x User Manual
• 1 x Micro USB Cable