Horizontech Falcon II Sector Mesh Coils

  • Ex Tax: $9.99
  • Product Code: M00000751
  • Availability: In Stock
$9.99

Description  The Horizontech Falcon II utiles the all new sector mesh co..

The Horizontech Falcon II utiles the all new sector mesh coils. These use a combination of wood pulp and cotton and are rated at 0.14ohm. They have an operating wattage of 70-75W. 

Airflow Maximisation 

The new fan woven mesh design maximises airflow at the bottom of the coil and heats upwards. This forces the vape to compress upwards and creates denser clouds and better flavour. 

Push & Pull Coils

The Horizon Falcon II coils are simple and easy to use.They use a simple pull and push fit mechanism meaning that you can easily manage coil changes. Furthermore, this mechanism is less likely to get jammed or cross threaded. 

These are not compatible with the Falcon, Falcon Mini and Falcon King. They can only be used with the Falcon 2 tank. 

3 coils per pack  

To prepare your coil (prime) for first time usage, follow the guide below: 

  1. Drop a Small Amount of E-Liquid Directly onto The Cotton & Cotton Windows On Your Coil. Be Careful Not To Oversaturate Your Coil
  2. Fill Up Your Tank With E-Liquid
  3. Take 5 Big Dry Pulls or Dry Hits (This Involves Inhaling On Your Tank Without Drawing Any Power From Your Device)
  4. Start Vaping from A Low Wattage

When preparing a coil that is in an enclosed pod which cannot be removed, use the steps below:

  1. Drop A Small Amount of E-Liquid Directly Onto the Coil Wick (Cotton In The Middle of The Coil)
  2. Fill Up Your Pod With E-Liquid
  3. Take 5 Big Dry Pulls/Dry Hits
  4. Start Vaping!

If you experience a burning taste from the start and you are using the correct e-liquid, it is likely you haven’t primed your coil enough. Spit back can occur a little when a coil is first used.Excess spitback can be a sign that your coil has been flooded. 

 

The life of a coil depends on several different factors, such as how much you vape, how low you let your e-liquid drop before refilling, batch quality and e-liquid compatibility. On average, for a normal user, a coil should last roughly 1-2 weeks. However, this can vary, and some coils can last longer than others. All coils are batched produced in extremely large volumes and not every coil from a batch is tested for quality and therefore, there is no guarantee on the life of each coil.  

You Must be 18 or Over to Purchase from This Website. Any Order Placed by Anyone Under the Age of 18 Will Be Cancelled & Refunded. Do Not Use if You Are Pregnant or Breastfeeding. Some Users Are Known to Be Allergic to Propylene Glycol (PG). Please Contact a Health Professional if You Experience Any Allergic Reactions. Keep All Products Out of Reach of Children and Pets. Follow All Warning Procedures On Individual Products.   

Write a review

Note: HTML is not translated!
    Bad           Good